49th POWER SOURCES CONFERENCE
 •  June 27-29, 2023, Gaylord National Resort & Convention Center, Fort Washington, MD, USA

Author Index


Rahman, Masoud

12-4: Ultra-fast Charging High-Energy and High-Power Silicon Anode Lithium-Ion Batteries ~ Paper Unavailable  


Ralston, Paula K.

1-5: Commercial and Consumer Battery Fire Trends-Learning from Mistakes of Others 

6-3: Dry Processed, Layered, Flexible Lithium-Ion Manufacturing Process 

25-4: Bipolar Lead Acid – Eliminating the Lead 


Ramaswami, Karthik

3-4: Novel Si Anode and High Ni NCM Cathode for High Energy Applications 


Rana, Rahil

10-2: Safety Evaluation of Lithium-ion Batteries Using Calorimetry ~ Paper Unavailable  


Raney, Alex

1-1: Improved Safety Lithium-ion Chemistry Development 


Rastegar, Jahangir

3-3: Direct Battery Electrolyte Heating and Temperature Maintenance at Low Temperatures 


Rastegar, Jahangir

22-3: Design and Implementation of Active Thermal Insulation to Improve Run-Time in Thermal Reserve Batteries 


Rastegar, Jay

P-5: Development of High Energy Density Lithium-Oxygen Reserve Batteries with Integrated Chemical Oxygen Generation 


Rauch, William

18-3: All Solid State Battery with Glass Electrolyte and High Energy Density 


Rauhala, Taina

16-6: Safety Characterization of Flow Batteries of Two Chemistries 


Ravdel, Boris

23-4: Lithium-Ion Battery Cells for Ultra High Power and Low Temperature Applications 


Revankar, Shripad T.

9-4: High-Energy Dense Power Sources for Low-Power Operation in Extreme Temperature Environments 


Reyes, Samantha

19-3: Analytical Exploration of Iron Disulfide Performance in Molten Salt Batteries 


Rhodes, Christopher P.

25-3: Designing High Discharge Capacity and High-Rate Nickel Hydroxide Cathodes for Rechargeable Alkaline Nickel–Zinc Batteries 


Ridenour, J. August

11-2: 1D Borophosphates for Use as Electrolyte Membranes in Solid Acid Fuel Cells 


Ridenour, J. August

11-5: Pyrolysis of Conductive 2D Coordination Polymers for Use as Solid Acid Fuel Cell Electrode Materials 


Rider, Lynne K.

13-3: Thermal Characterization of Materials for Improved Modeling and Simulation of Thermal Batteries 


Roberts, Christine C.

13-4: Mechanical Characterization of Insulation Materials During Thermal Battery Manufacturing 


Roberts, Rory

8-2: Solid Oxide Fuel Cell Manufacture by Computationally Driven Aerosol Jet Printing 


Roberts, Scott A.

13-1: Coupled Thermal-Electrochemical Full Battery Modeling of LiSi/FeS2 Batteries 

13-2: Development of a Cloud-Based Tool for Predicting Thermal Battery Performance: TABS v6 

13-5: Accelerating Thermal Battery Design with Set-Based Concurrent Engineering 


Rodgers, Joseph A.

5-2: Lightweight Hydrogen Fuel Cells for Unmanned Aircraft and Small Unit Power 


Rodrigues, Stanley

18-4: Phthalocyanine-based Hybrid Catalyst for Rechargeable Lithium-Oxygen Batteries 


Rodríguez-Cabańas, Lissette

9-2: Decentralized Energy Generation and Environmental Impact Reduction via Perovskite Solar Cells 


Rolison, Debra R.

10-3: Laboratory-Based X-Ray Absorption Spectroscopy as a New Research Tool for Battery-Relevant Materials and Beyond 

24-2: 3D All Solid-State Ag–Zn Batteries: A Non-Strategic Chemistry to Meet DoD Energy and Power Needs 

25-1: Next-Generation Rechargeable Silver–Zinc Batteries Enabled by Interfacial Control and Electrode Redesign 

25-3: Designing High Discharge Capacity and High-Rate Nickel Hydroxide Cathodes for Rechargeable Alkaline Nickel–Zinc Batteries 

5-5: Saving Pt-Catalyzed PEM Fuel Cells from CO Poisoning by Getting COPROX to Work! 


Roychoudhury, Subir

8-1: JP-8 Fuel Cell Powered Electric Vehicle and Generator 

17-5: Family of Lightweight Logistics Fueled Generators 


Rutberg, Michael

21-3: Robust, Zero-Volt-Capable, High-Power Lithium-Ion batteries for Military Platforms 


Ruth, Ashley

P-3: Comparative Testing of Commercially Available and Novel Lithium Cell Technologies for Unmanned Aircraft Systems Applications 


Ryou, Heonjune

11-2: 1D Borophosphates for Use as Electrolyte Membranes in Solid Acid Fuel Cells 


Sanchez, Peggy A.

13-3: Thermal Characterization of Materials for Improved Modeling and Simulation of Thermal Batteries 

27-1: Improvement of Low Temperature Performance of Supercapacitors using Ionic Liquid Based Electrolytes 


Sassin, Megan B.

P-1: Increasing the Ionic Conductivity of Alkali Carbonphosphonitride Thermosets through Plasticization and Formulation 

15-3: Free-Standing Carbon Nanofoam Papers Vapor-Infiltrated with Sulfur as Lithium-Sulfur Battery Cathodes 

24-2: 3D All Solid-State Ag–Zn Batteries: A Non-Strategic Chemistry to Meet DoD Energy and Power Needs 


Scanlon, Lawrence

18-4: Phthalocyanine-based Hybrid Catalyst for Rechargeable Lithium-Oxygen Batteries 


Scenna, Richard

8-5: Fuel Cell Power Sources for the Dismounted Soldier ~ Paper Unavailable  

8-6: Purification of windshield wiper fluid for fuel cell applications ~ Paper Unavailable  

11-1: Synthesis of a Copper Zinc Oxide Catalyst using Pre-Coated Gamma Phase Alumina Supports 


Scherzberg, Eric

P-12: High-Power Density Thermal Batteries for Space and Defense Applications 


Scherzberg, Eric

22-3: Design and Implementation of Active Thermal Insulation to Improve Run-Time in Thermal Reserve Batteries 


Scherzberg, Eric

22-4: Long Life Molten Salt Battery for NASA Venus Application 


Schimmel, Dave

8-5: Fuel Cell Power Sources for the Dismounted Soldier ~ Paper Unavailable  


Schmidt, Daniel P.

13-3: Thermal Characterization of Materials for Improved Modeling and Simulation of Thermal Batteries 


Schmidt, Gary

2-4: High Power Li/CFx-MnO2 Hybrid Technology 


Schorr, Noah B.

19-3: Analytical Exploration of Iron Disulfide Performance in Molten Salt Batteries 


Schousboe, Carl

P-11: High-Volume Cobalt Disulfide Thermal Battery Production 


Sepe Jr., Raymond B.

20-3: Lithium-Ion Battery/Lithium-Ion Capacitor Hybrid Energy Storage Device in UUV Applications 


Shah, Shailesh

8-5: Fuel Cell Power Sources for the Dismounted Soldier ~ Paper Unavailable  


Sharratt, Andy

27-4: Fluorinated Battery Electrolytes for Wide Operating Temperature Range 


Shedden, Devon

20-2: Rapid Development of High Endurance nano-UAS Mission Batteries 


Shen, Caiwei

24-1: A Solid Solution-Based Tough Polymer Electrolyte for Structural Energy Storage Applications 


Siberry, Vinod

17-3: Solid State Transformer with Predictive Digital Twin ~ Paper Unavailable  


Siegal, Edward

21-3: Robust, Zero-Volt-Capable, High-Power Lithium-Ion batteries for Military Platforms 


Silguero, Cory M.

25-3: Designing High Discharge Capacity and High-Rate Nickel Hydroxide Cathodes for Rechargeable Alkaline Nickel–Zinc Batteries 


Singh, Jagmohan

16-3: Experimental Study of Battery Parameters and Their Variations During Cycle Aging and State of Charge of a Sealed Lead Acid Battery 


Singh, Pritpal

16-3: Experimental Study of Battery Parameters and Their Variations During Cycle Aging and State of Charge of a Sealed Lead Acid Battery 


Singh, Surendra Kumar

10-2: Safety Evaluation of Lithium-ion Batteries Using Calorimetry ~ Paper Unavailable  


Skelton, Donald

9-1: Powder Bed Fusion of Nontoxic Copper(I) Sulfide Thermoelectric Materials for Energy Harvesting 


Slonopas, Andre

9-2: Decentralized Energy Generation and Environmental Impact Reduction via Perovskite Solar Cells 


Sloop, Steve

P-7: Lithium-Ion Battery Deactivation / Render Safe ~ Paper Unavailable  


Smith, David

19-1: Development of Magnesium Oxide (MgO) Binder for Thermal Batteries 


Smith, Patricia H.

12-3: Silicon-Nanowire Anode Battery Assessment and Comparison to Li-Ion 


Somes, Brian

17-1: IPOWER: A Dismounted Warfighter Energy Simulation and Analysis Tool 


Song, Jihun

P-17: Digital-Twin Electrode Modeling Method Enabled by Limited SEM Images for Lithium Secondary Batteries ~ Paper Unavailable  


Spears, Andre

P-9: Bipropellant Enabled Solid Oxide Fuel Cell Stack Power Supply: Energy Agility for Space Vehicles ~ Paper Unavailable  


Spence, David

17-5: Family of Lightweight Logistics Fueled Generators 


Srinivas, Girish

9-3: Hydrogen-fueled Power Generator using Nanogalvanic Aluminum Alloy to Produce Hydrogen 


Sriramulu, Suresh

27-4: Fluorinated Battery Electrolytes for Wide Operating Temperature Range 


Stanley, Bradley

9-2: Decentralized Energy Generation and Environmental Impact Reduction via Perovskite Solar Cells 


Stefan, Ionel

6-4: High Power, High Energy, High Safety Cell Technologies 


Stein, Mike

P-4: The Small Tactical Universal Battery Series – Helping to Solve Modern Tactical Power Challenges 


Steinhurst, Daniel A.

8-3: Spatially Resolving Heterogenous Chemistry on SOFC electrodes with Operando Optical Methods ~ Paper Unavailable  


Steinmetz, Ethan R.

20-4: Ballistic Conformal Battery 

20-1: Performance Gains In Li-ion Backup Batteries for Aircraft ~ Paper Unavailable  


Stern, Aaron M.

13-3: Thermal Characterization of Materials for Improved Modeling and Simulation of Thermal Batteries 

19-1: Development of Magnesium Oxide (MgO) Binder for Thermal Batteries 

19-4: Enhanced Performance in Thermal Batteries Containing Nanostructured Cathode Materials 


Stroman, Richard O.

5-2: Lightweight Hydrogen Fuel Cells for Unmanned Aircraft and Small Unit Power 

17-1: IPOWER: A Dismounted Warfighter Energy Simulation and Analysis Tool 


Stuart, Samuel

9-1: Powder Bed Fusion of Nontoxic Copper(I) Sulfide Thermoelectric Materials for Energy Harvesting 

19-1: Development of Magnesium Oxide (MgO) Binder for Thermal Batteries 


Su, Sean

3-4: Novel Si Anode and High Ni NCM Cathode for High Energy Applications 


Swank, Jeffery A.

P-13: High Power Reserve Battery for Extremely Low Temperature Applications 


Swanson, David B.

19-4: Enhanced Performance in Thermal Batteries Containing Nanostructured Cathode Materials 


Swift, Michael W.

24-2: 3D All Solid-State Ag–Zn Batteries: A Non-Strategic Chemistry to Meet DoD Energy and Power Needs 


Tanim, Tanvir R.

10-5: A Reconfigurable Test Platform for Benchmarking and Developing New Battery Safety Diagnostic Technologies ~ Paper Unavailable  


Taphouse, John H.

19-3: Analytical Exploration of Iron Disulfide Performance in Molten Salt Batteries 


Taphouse, John

22-1: Discharge in Unactivated Thermal Batteries 


Tatarchuk, Bruce J.

4-2: The Effect of the Heat Transfer Coefficient on Li-ion Battery Failure 

26-3: Heat Transfer and Cell Failure Analysis for Configuration of a Non-Propagating Li-ion Battery Pack with a Copper Microfibrous Cooling Structure during Extreme-Condition Pulse Power Operation 


Tessier, Roger

24-1: A Solid Solution-Based Tough Polymer Electrolyte for Structural Energy Storage Applications 


Teymoory, Parya

24-1: A Solid Solution-Based Tough Polymer Electrolyte for Structural Energy Storage Applications 


Thoemmes, Carl

14-1: Blended Electrolytes for Li-Ion Cell R&D and Production 


Todd, Jordan

10-5: A Reconfigurable Test Platform for Benchmarking and Developing New Battery Safety Diagnostic Technologies ~ Paper Unavailable  


Tongchao, Liu

12-5: Development of a High Power Rechargeable Li-Metal Cell ~ Paper Unavailable  


Torres-Castro, Loraine

10-5: A Reconfigurable Test Platform for Benchmarking and Developing New Battery Safety Diagnostic Technologies ~ Paper Unavailable  


Trebukhova, Svetlana

23-4: Lithium-Ion Battery Cells for Ultra High Power and Low Temperature Applications 


Trevey, James

14-3: Developing a Power and Energy Voice for the DoD and Communicating with Industry ~ Paper Unavailable  

23-2: On the Path towards Domestic Energy Security, Setting Up a Domestic Production Base While Integrating Advanced Technology ~ Paper Unavailable  


Tsao, Bang

8-2: Solid Oxide Fuel Cell Manufacture by Computationally Driven Aerosol Jet Printing 


Urban, Brittany

19-2: Synthetic Production of Tunable Magnesium Oxide for Thermal Batteries: Drag and Drop 


Usrey, Monica L.

24-5: Advanced Electrolyte Solvents to Enable High Ni NMC Lithium Ion Batteries 

27-3: Fluorinated Battery Electrolytes for High Silicon Anodes and High Voltage Cell Designs 

27-4: Fluorinated Battery Electrolytes for Wide Operating Temperature Range 


Vallo, Nick

17-3: Solid State Transformer with Predictive Digital Twin ~ Paper Unavailable  

20-1: Performance Gains In Li-ion Backup Batteries for Aircraft ~ Paper Unavailable  

20-4: Ballistic Conformal Battery 


Vanheusden, Karel

15-4: Advanced Lithium-Sulfur Batteries Based on Lyten 3D Graphene™ 


Vilekar, Saurabh A.

8-1: JP-8 Fuel Cell Powered Electric Vehicle and Generator 


Visco, Steven J.

24-4: Development and Manufacturing of High Energy Density Solid Electrolyte Enabled Batteries ~ Paper Unavailable  


Vose, Andrew

20-3: Lithium-Ion Battery/Lithium-Ion Capacitor Hybrid Energy Storage Device in UUV Applications 


Voskuilen, Tyler G.

13-1: Coupled Thermal-Electrochemical Full Battery Modeling of LiSi/FeS2 Batteries 

13-2: Development of a Cloud-Based Tool for Predicting Thermal Battery Performance: TABS v6 


Vozikis, Rachel

1-4: Large Format Lithium Metal Cells with Integrated Safety Features ~ Paper Unavailable  


Vriarte, Kevin

P-13: High Power Reserve Battery for Extremely Low Temperature Applications 


Walker, Lee K.

10-5: A Reconfigurable Test Platform for Benchmarking and Developing New Battery Safety Diagnostic Technologies ~ Paper Unavailable  


Walker, Robert A.

8-3: Spatially Resolving Heterogenous Chemistry on SOFC electrodes with Operando Optical Methods ~ Paper Unavailable  


Walker, William

7-5: Improved Methods for Soft Short Detection in Li-ion Cells and Automated Cell Screening  


Waller, Gordon H.

4-1: Evaluation of Lithium-ion Batteries Following a Single Thermal Insult 


Waller, Gordon

16-5: Safety and Performance Testing of Commercially Available Sodium-ion Batteries 


Wang, Jun

3-4: Novel Si Anode and High Ni NCM Cathode for High Energy Applications 


Warne, Andrew G.

P-13: High Power Reserve Battery for Extremely Low Temperature Applications 

27-1: Improvement of Low Temperature Performance of Supercapacitors using Ionic Liquid Based Electrolytes 


Waterman, Kyle G.

20-3: Lithium-Ion Battery/Lithium-Ion Capacitor Hybrid Energy Storage Device in UUV Applications 


Weaver , Tristan

11-3: CO2 Electrochemical Reduction to C1 Compounds 


Wertz, Dan

17-2: Development and Use of Machine Learning and Artificial Intelligence for Life Optimization and Failure Detection of Lithium-ion Batteries for Unmanned Applications ~ Paper Unavailable  


Wesolowski, Daniel E.

22-1: Discharge in Unactivated Thermal Batteries 


West, Patrick J.

4-1: Evaluation of Lithium-ion Batteries Following a Single Thermal Insult 


Whetstone, Chris

P-4: The Small Tactical Universal Battery Series – Helping to Solve Modern Tactical Power Challenges 


White, Ralph E.

7-4: Scale-Up Challenges for Passively Propagation Resistant Batteries: 18650 to 21700 


Wickramaarachchi, Kethaki

25-5: Scalable Production of Electrolytic Manganese Dioxide (EMD) and Their Electrochemical Energy Storage in Aqueous Electrolyte 


Wightman, Brian D.

19-4: Enhanced Performance in Thermal Batteries Containing Nanostructured Cathode Materials 

P-15: Development of Custom Cathode Matrix for Li-SOCl2 Reserve Batteries ~ Paper Unavailable  


Wittmaier, Logan

1-1: Improved Safety Lithium-ion Chemistry Development 

15-5: Lithium Sulfur Pouch Cells with Improved Energy Density for Portable Power Applications 


Wittman, Reed

21-1: Degradation of Li-ion Cells Beyond 80% Initial Capacity 


Woehl, Taylor

26-2: Investigations of Multi-Metallic Nanocatalysts for Promoting Plasmon-Augmented Chemical Energy Conversion 


Wood, III, David L.

3-1: High-Purity, CO2-Derived Multiwall Carbon Nanotube Formulations for Realizing High-Energy and High-Power Lithium-Ion Cells 


Yang, Anson

12-2: Advance Anode Chemistry for High Energy Li-ion Cell 


Ye, Donghao

15-1: High-Energy-Density and Low-Cost Lithium-Ion Batteries Using Sulfurized Polyacrylonitrile Cathodes 


Yeom, Junghoon

27-2: Creating Stable Interfaces in Lithium-Metal Batteries via Initiated Chemical Vapor Deposition Nanoscale Coatings 


Yesilirmak, Yener

2-1: Development of Hish Power/High Energy DensitIy Lithium Oxyhalide Resreve Battery ~ Paper Unavailable  


Zalar, Frank

1-2: High Performance, Safe Lithium Ion Battery Cell ~ Paper Unavailable  

2-2: Micro-Reserve Battery ~ Paper Unavailable  

6-1: Design and Automated Assembly of Li-metal Rechargeable Pouch Cells ~ Paper Unavailable  

9-5: Advanced Lithium Sulfur Battery ~ Paper Unavailable  

20-1: Performance Gains In Li-ion Backup Batteries for Aircraft ~ Paper Unavailable  

20-4: Ballistic Conformal Battery 


Zhang, Qiuhong

8-2: Solid Oxide Fuel Cell Manufacture by Computationally Driven Aerosol Jet Printing 


Zhao, Feng

P-18: High Energy Semi-Solid Anode In-Situ Battery ~ Paper Unavailable  


Zheng, Jim P.

15-1: High-Energy-Density and Low-Cost Lithium-Ion Batteries Using Sulfurized Polyacrylonitrile Cathodes 


Zhou, Liu

27-3: Fluorinated Battery Electrolytes for High Silicon Anodes and High Voltage Cell Designs 


Zhu, Wenhua H.

4-2: The Effect of the Heat Transfer Coefficient on Li-ion Battery Failure 

26-3: Heat Transfer and Cell Failure Analysis for Configuration of a Non-Propagating Li-ion Battery Pack with a Copper Microfibrous Cooling Structure during Extreme-Condition Pulse Power Operation 

 

(Return to Top to Navigate the PowerSources 2023 Author Index)